Damage induced in garnets by heavy ion irradiations: a study by optical spectroscopies

The damage induced by heavy-ion irradiation has been studied in yttrium iron garnet (Y₃Fe₅O₁₂ or YIG) films, doped with Ca, Tb and Tm, grown by liquid-phase epitaxy on gadolinium gallium garnet (Gd₃Ga₅O₁₂ or GGG) substrates. Irradiations of doped-YIG epitaxial films and GGG substrates with 36-MeV ¹⁸³W and 12-MeV ¹⁹⁷Au ions were applied for fluences between 1 × 10¹³ and 3 × 10¹⁵ cm^–2 near room temperature. The radiation damage was monitored by micro-Raman spectroscopy and UV–visible optical absorption spectroscopy. Raman spectra revealed that amorphisation was achieved in YIG for both ions, whereas a high lattice disorder was induced in GGG without reaching amorphisation for the Au ion irradiation. Raman spectra also showed that a major damage of the tetrahedral sites was induced in GGG, as previously found for YIG. It is concluded that with such ions reaching the stopping power threshold of track formation in YIG and GGG the observed rate of amorphisation may result from a combination of electronic and nuclear energy losses as calculated using the unified thermal spike model.     

Probing structural integrity of single walled carbon nanotubes by dynamic and static compression

We report on a first study of single walled carbon nanotubes (SWCNTs) after application of dynamic (shock) compression. The experiments were conducted at 19 GPa and 36 GPa in a recovery assembly. For comparison, an experiment at a static pressure of 36 GPa was performed on the material from the same batch in a diamond anvil cell (DAC). After the high pressure treatment the samples were characterized by Raman spectroscopy and transmission electron microscopy (TEM). After exposure to 19 GPa of shock compression the CNT material exhibited substantial structural damage such as CNT wall disruption, opening of the tube along its axis (“unzipping”) and tube shortening (“cutting”). Dynamic compression to 36 GPa resulted in essentially complete CNT destruction whereas at least a fraction of the nanotubes was recovered after 36 GPa of static compression though severely damaged. The results of these shock wave experiments underline the prospect of using SWCNTs as reinforcing units in material WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

SPE–NMR metabolite sub-profiling of urine

NMR-based metabolite profiling of urine is a fast and reproducible method for detection of numerous metabolites with diverse chemical properties. However, signal overlap in the (1)H NMR profiles of human urine may hamper quantification and identification of metabolites. Therefore, a new method has been developed using automated solid-phase extraction (SPE) combined with NMR metabolite profiling. SPE-NMR of urine resulted in three fractions with complementary and reproducible sub-profiles. The sub-profile from the wash fraction (100?% water) contained polar metabolites; that from the first eluted fraction (10?% methanol-90?% water) semi-polar metabolites; and that from the second eluted fraction (100?% methanol) aromatic metabolites. The method was validated by analysis of urine samples collected from a crossover human nutritional intervention trial in which healthy volunteers consumed capsules containing a polyphenol-rich mixture of red wine and grape juice extract (WGM), the same polyphenol mixture dissolved in a soy drink (WGM_Soy), or a placebo (PLA), over a period of five days. Consumption of WGM clearly increased urinary excretion of 4-hydroxyhippuric acid, hippuric acid, 3-hydroxyphenylacetic acid, homovanillic acid, and 3-(3-hydroxyphenyl)-3-hydroxypropionic acid. However, there was no difference between the excreted amounts of these metabolites after consumption of WGM or WGM_Soy, indicating that the soy drink is a suitable carrier for WGM polyphenols. Interestingly, WGM_Soy induced a significant increase in excretion of cis-aconitate compared with WGM and PLA, suggesting a higher demand on the tricarboxylic acid cycle. In conclusion, SPE-NMR metabolite sub-profiling is a reliable and improved method for quantification and identification of metabolites in urine to discover dietary effects and markers of phytochemical exposure.     

Concentration landscape generators for shear free dynamic chemical stimulation

In this paper we first introduce a novel fabrication process, which allows for easy integration of thin track-etched nanoporous membranes, within 2D or 3D microchannel networks. In these networks, soluble chemical compounds can diffuse out of the channels through well-defined and spatially organized microfabricated porous openings. Interestingly, multiple micron-scale porous areas can be integrated in the same device and each of these areas can be connected to a different microfluidic channel and reservoir. We then present and characterize several membrane-based microdevices and their use for the generation of stable diffusible concentration gradients and complex dynamic chemical landscapes under shear free conditions. We also demonstrate how a simple flow-focusing geometry can be used to generate "on-demand" concentration profiles. In turn, these devices should provide an ideal experimental framework for high throughput cell-based assays: long term high-resolution video microscopy experiments can be performed, under multiple spatially and temporally controlled chemical conditions, with simple protocols and in a cell-friendly environment.     

Addition of dioxygen to an N4S(thiolate) iron(II) cysteine dioxygenase model gives a structurally characterized sulfinato-iron(II) complex

The non-heme iron enzyme cysteine dioxygenase (CDO) catalyzes the S-oxygenation of cysteine by O(2) to give cysteine sulfinic acid. The synthesis of a new structural and functional model of the cysteine-bound CDO active site, [Fe(II)(N3PyS)(CH(3)CN)]BF(4) (1) is reported. This complex was prepared with a new facially chelating 4N/1S(thiolate) pentadentate ligand. The reaction of 1 with O(2) resulted in oxygenation of the thiolate donor to afford the doubly oxygenated sulfinate product [Fe(II)(N3PySO(2))(NCS)] (2), which was crystallographically characterized. The thiolate donor provided by the new N3PyS ligand has a dramatic influence on the redox potential and O(2) reactivity of this Fe(II) model complex.     

EOT or Kretschmann configuration? Comparative study of the plasmonic modes in gold nanohole arrays

The debate is still ongoing on the optimal mode of interrogation for surface plasmon resonance (SPR) sensors. Comparative studies previously demonstrated that nanoparticles exhibiting a localized SPR (LSPR) have superior sensitivity to molecular adsorption processes while thin Au film-based propagating SPR is more sensitive to bulk refractive index. In this paper, it is demonstrated that nanohole arrays (1000 nm periodicity, 600 nm diameter and 125 nm depth), which support both LSPR and propagating SPR modes, exhibited superior sensitivity to bulk refractive index and improved detection limits for IgG sensing by using the Kretschmann configuration. The greater sensitivity to IgG detection in the Kretschmann configuration was obtained despite the shorter penetration depth of nanohole arrays excited in the enhanced optical transmission (EOT) configuration. The decay length of the electromagnetic field in EOT mode was estimated to be approximately 140 nm using a layer-by-layer deposition technique of polyelectrolytes (PAH and PSS) and was confirmed with 3D FDTD simulations, which was lengthen by almost a factor of two in the Kretschmann configuration. Spectroscopic data and field depth were correlated with RCWA and FDTD simulations, which were in good agreement with the experimental results. Considering these analytical parameters, it is advantageous to develop sensors based on nanohole arrays in the Kretschmann configuration of SPR.     

Enantioselective metallo-organocatalyzed preparation of cyclopentanes bearing an all-carbon quaternary stereocenter

Enantioselective metallo-organocatalyzed carbocyclizations of formyl-alkynes have been developed. The cooperation between aminocatalysis and a chiral copper(I) complex granted access to enantio-enriched cyclopentanes through the challenging formation of all-carbon quaternary stereocenters.     

New Efficient Synthetic Pathways to Tetrakis{p‐[(diethylphosphono)methyl]}calix[4]arene

Various operating conditions have been applied on tetrakis[p‐(halogenomethyl)]‐ and tetrakis[p‐(aminomethyl)]calix[4]arene derivatives to improve the synthesis of the 5,11,17,23‐tetrakis[(diethylphosphono)methyl]‐25,26,27,28‐tetrahydroxycalix[4]arene. Two new, high yield, synthetic pathways have been selected, involving, for the first one, the 25,26,27,28‐tetrahydroxy‐5,11,17,23‐tetrakis[(trimethylamino)methyl]calix[4]arene, tetraiodide, DMF, and 10 equiv. of triethyl phosphite ((EtO)₃P), and, for the other one, the 5,11,17,23‐tetra(bromomethyl)‐25,26,27,28‐tetrahydroxycalix[4]arene, CH₂Cl₂, and only 4 equiv. of (EtO)₂P.